Select a control to view its settings on the right, or click "Show Values" to see the value of each control simultaneously: Settings for pads and buttons include the ability to set the control type (Note or CC), set the Press type to Momentary (press to turn a value on, release to set it off) or Toggle (press once for on value, press again for off). Settings for the pots include the ability to set the CC number a control will send, the MIDI channel it sends on, the minimum and maximum values, the colour of the LED, and the LED MIDI channels which determines which channel the LED under the dial will respond to from incoming MIDI messages. Or create a new one from scratch - this new template is the default User template that comes on the unit. You can get a template from the Launch Control XL: The top right of the page indicates the unit's connection status: If you are using a browser, you may need to allow the page to access your MIDI devices, as prompted when first loading the page:
Novation launchcontrol select buttons download#
You can either download the standalone application when you register your Launch Control XL to our customer portal, or you can access our web-based version in browsers that support webMIDI such as Chrome, Opera and Microsoft Edge from this link: When combined with Launchpad’s intuitive 64-button grid, Launch Control XL provides simultaneous control over Ableton Live.
It feels like a bit of a missed opportunity that the Send knobs can't be used to control device parameters like the Pan knobs can, but that's certainly not enough of an issue to prevent us giving it our wholehearted recommendation.Components can be used to manage the templates stored on the Launch Control XL.Ĭomponents is a tool used to manage the firmware and templates for many of our products. Product Description The Novation Launch Control XL provides 16 buttons, 24 knobs and eight faders, all of which integrate seamlessly with Live to give you total hands-on control. The sturdy design makes it ideal for live performance, but it's quite at home as a mixing tool in the studio too. The Launch Control XL is a very well thought-out controller that packs a lot into its relatively tiny surface area. There are also two Send Select buttons for selecting which sends in Live the Send A and Send B knobs control. So, once you've got the hang of how the modifiers work, you can select any device on any track and tweak its parameters without touching your mouse or keyboard. When held, the Device button also turns the Track Select buttons into Device Select buttons, which cycle through the instruments and effects on the currently selected track.
This setup would be much better if the Send A and Send B knobs could also be used for device control, but as it stands, the only way to get access to all of the controls is to create a user template - see Template of Dreams. In the case of EQ Eight, for example, the first bank sees the knobs controlling each band's on/off state, the second band frequency, the third band Gain, and so on. The Device modifier button switches the Pan knobs into Device mode, under which they control eight of the currently selected plugin's parameters.įurther parameters can then be accessed by holding down the Device button, which turns the Track Control pads into Device Bank selectors, each with its own Pan/Device knob assignments. The Track Select buttons jump the whole controller between banks of eight channels in Live: 1-8, 9-16, 17-24 and so on. Pressing Track Focus on a channel selects that channel's strip in Live, as if you'd clicked on it, while Track Control has three modes of operation, selected using the buttons on the right-hand side of the unit: Mute, Solo and Record Arm - it's all very straightforward.
0 kommentar(er)
